expressmouldby General Plastic Industries General Plastic Industries (GPI) logo

Home / FAQ

Sounds too good to be true? Ask us anything.

33 straight answers about speed, the late-delivery penalty, quality, cost and which parts fit. Can't find yours? WhatsApp us — a person from our tool room replies.

Speed and the penalty

Is a mould in 15 days really possible?

Yes. We do not build a whole new mould. Our standard mould bases are already made; for your part we machine only the core and cavity in tool steel and fit them in. We have delivered 70+ Express Moulds this way.

When does the 15-day clock start?

When you approve the mould design and pay the advance (typically 50%). If our tool room is fully loaded when you order, we tell you upfront the date your 15 days will start, so the committed date is always clear before you pay.

What exactly happens if you are late?

We pay you ₹2,000 for every day after the committed date, adjusted against your invoice. The clock starts when you approve the mould design and pauses only if you ask for a design change. It is written into your order.

When does the penalty not apply?

The clock pauses if you change the design after approval, or while we wait for your approvals or inputs. The penalty is capped at 50% of the mould cost. If we are fully loaded when you order, we tell you in advance when your 15 days begin, and the penalty counts from that committed date.

The mould is ready on day 15 — when do I get parts?

First moulded samples follow the mould trial, so parts are in your hands in 15–17 days from design approval.

Can you do it even faster?

In specific cases, yes: 7–10 days. It depends on our current load and how simple or complex the part is, and there is an extra charge for it. Mention your deadline when you send the drawing and we will tell you what is possible.

Which parts fit

What size of parts can be made?

Parts that fit our standard bases for 100–300 ton machines — on our parts page you can see everything from a 2 mm bush to housings over 150 mm. Send your drawing and we will confirm.

Which plastics can you mould?

All common engineering and commodity plastics, including PP, PE (HDPE and LDPE), PS and HIPS, ABS, PC, PC-ABS, PMMA (acrylic), nylon (PA6, PA66, glass-filled), POM (acetal / Delrin), TPE and TPU, and PBT. Tell us your material and grade when you send the drawing.

Can you make parts with undercuts, sliders or metal inserts?

Yes. Undercuts, sliders and metal inserts are all possible with Express Mould. Very complex parts with many undercuts or many sliders can be difficult on a standard base. For those, our tool room tells you on day one whether a full production mould is the better route.

Can every part be made with Express Mould?

No — and we would rather tell you upfront. About 8 in 10 parts can. Very complex parts with many sliders or side actions, or parts too big for our standard bases (we have run larger trials on a 500 ton machine), need a full mould. Our tool room tells you on day one which route your part needs.

Do you accept every project?

No. Because we put our own money behind every committed date, we take on a limited number of new projects each month and accept only parts we are sure we can deliver on time. Every drawing is reviewed by our tool room first.

Should I use 3D printing or vacuum casting instead?

For 1–10 pieces, yes: 3D printing has no mould cost. For 10–200, vacuum casting can work. From about 200 pieces up to about 1 lakh a year, Express Mould wins: real injection-moulded parts in your own plastic, at production piece price, with no compromise on strength or finish. Above 1 lakh pieces a year, a full production mould is best.

When is Express Mould NOT the right choice?

For more than about 1 lakh pieces a year, very complex parts with many undercuts and sliders, parts too large for our bases (standard 100–300 ton, trials up to 500 ton), or when you need a multi-cavity mould immediately. For those we build a full production mould.

Quality

Is an Express Mould lower quality than a normal mould?

No. The core and cavity — the parts that shape your product — are made in tool steel, the same as a conventional production mould. Only the mould base is our standard, reused base.

Which steel do you use for the core and cavity?

P20 and H13 tool steel, the same steels used in conventional production moulds. So there is no compromise on surface finish, quality or mould life.

How long will the mould last?

Typically 2 to 3 lakh shots. Mould maintenance is included in the per-piece moulding price, so there is no separate maintenance bill.

What tolerances and surface finish can you achieve?

You can choose glossy, textured or matt finishes. We do all standard VDI and SPI finishes. Share any critical tolerances on your drawing and our tool room confirms them before the mould design is approved.

What if the first samples do not match my drawing?

We rework the mould free of cost until the parts match your approved drawing, and the rework is completed within a week.

Cost and payment

How much does an Express Mould cost?

Most Express Moulds cost between ₹50,000 and ₹5 lakh, depending on part size, complexity and material. That is about half the cost of a conventional mould for the same part. Moulded parts range from as low as ₹0.10 to ₹999 per piece. GST is extra. See the price guide at /express-mould-price/, or send your drawing for an exact quote.

Why is it so much cheaper?

Because you do not pay for a new mould base — that is a large share of a normal mould’s cost. You pay only for the core and cavity made for your part.

What are the payment terms?

50% advance with the order, 30% at T0 (first trial), and 20% on sample approval. GST is extra.

Is there any hidden cost?

No. The quote covers the mould, samples and trial material, plus the per-piece moulding price, which includes mould maintenance. Transport is not included and is quoted separately. GST is extra.

Production and volume

How many parts can I get per month?

Express Mould suits up to about 1 lakh pieces a year. On a shared base each mould gets 4–5 production days a month, about 4,000–5,000 pieces. If you need more within the year, the same core and cavity move to a dedicated base with no monthly limit.

What if I need more parts later?

You move up: the same inserts go into a dedicated base with no monthly limit, or we build a multi-cavity production mould. 20–30% of our Express Mould clients have already done this.

Do you only make the mould, or the parts too?

Both. Design, tool room and moulding are under one roof — you receive moulded parts every month, not just a tool.

Do you deliver across India and abroad?

Yes. We deliver moulded parts across India and export them abroad. Transport is quoted separately from the mould and parts.

Ownership and confidentiality

Who owns the core and cavity?

You do. Express Mould works because we also mould your parts: the core and cavity run on our shared standard base, in our plant. Ownership stays with you as long as the moulding is done by us.

Can I take my mould to another moulder?

Yes. You take the core and cavity (the standard base stays with us, as it is shared). Because we do not charge a profit on the core and cavity when we do the moulding, lifting them means paying an extra 30% of their cost. Express Mould is only offered when the moulding is done by us.

Is my design kept confidential?

Yes. Your drawings are used only for your job, and we never show your part or name without written permission. We are happy to sign an NDA before you share files.

Process and updates

What do I need to send for a quote?

A 3D CAD file (STEP, IGES or STL), the plastic material, quantity per month and your deadline. A 2D drawing helps if you have critical tolerances.

I do not have a CAD file. Can you still help?

Yes. Our team can design from a sample, a sketch or a photo. We recommend sending a physical sample if you can: it is faster and cheaper than working from a sketch, which can cost you extra time and money.

How will I know how my mould is progressing?

You get a photo update on WhatsApp at every stage — design approved, machining, trial, parts ready.

Who is behind Express Mould?

General Plastic Industries, an injection moulder in Delhi since 1968. Express Mould came out of 13 months of R&D in our own tool room.

No question matches that. Ask us on WhatsApp — we'll answer and add it here.

Send your drawing for review