expressmouldby General Plastic Industries General Plastic Industries (GPI) logo

Home / Guides

How much does an injection mould cost in India?

Short answer: A simple single-cavity mould in India typically costs about US$3,500–8,000, and complex moulds run far higher. Size, steel, number of cavities, side actions and finish drive the price. A modular mould that reuses a standard base can cost about half, because only the core and cavity are made for your part.

Injection mould prices vary widely, so the honest answer is a range plus the factors that move it.

What are typical injection mould prices in India?

Published industry comparisons give these single-cavity ranges for India (US dollars):

Mould type India (typical)
Simple, 2-plate, no lifters about $3,500–8,000
Medium, with slides about $10,000–25,000
Complex (hot runner, several slides, high polish) about $28,000–80,000

The same comparison puts Indian tooling about 20–35% above China for the tool itself. Use these as orientation, not quotes. Your part's geometry decides the real number.

What drives the price of an injection mould?

  • Size of the part, and therefore of the mould and the machine it runs on.
  • Cavities. Each extra cavity adds steel and machining.
  • Undercuts. Each side action or lifter adds cost and time.
  • Runner system. Hot runners cost more than cold runners.
  • Finish and tolerance. High polish, texture and tight tolerances add hours.
  • Steel. Tool steel lasts far longer than aluminium and holds tolerance better, but costs more to machine.

Where does most of the money in a mould go?

A conventional mould is two things: a heavy steel base (plates, guide pins, ejection system) and the core and cavity that actually shape your part. For small and medium parts, the base is a large share of the price and of the lead time.

How can you pay less without cutting corners?

  1. Reuse a standard base. A modular mould keeps a standard base and makes only the core and cavity for your part. At Express Mould this brings the die cost to about half of a conventional mould, with the core and cavity still in tool steel.
  2. Design out undercuts where the function allows, since each side action adds cost.
  3. Start single-cavity, and add cavities when volumes are proven.
  4. Ask for a design-for-manufacturing review before steel is cut. Small changes to draft, wall thickness or gate position can save a lot.

What does an Express Mould cost?

An Express Mould costs between ₹50,000 and ₹5 lakh, and moulded parts range from ₹0.10 to ₹999 a piece, depending on the part. See the Express Mould price guide for what sets the price.

Why is price only half of the decision?

A cheap mould that arrives in 70 days instead of 45 can cost you a launch. When comparing quotes, ask for a committed delivery date in writing, and what happens if it is missed.

Questions buyers ask

Why is a modular mould cheaper?

Because the heavy steel base is already built and reused. You pay only for the core and cavity, the parts that shape your product, made in tool steel.

Is India cheaper than China for moulds?

Usually not for the tool itself: published comparisons put Indian tooling about 20–35% above China. India is often competitive on parts with inserts, engineering plastics and shorter supply chains, and on lead-time reliability.

What makes a mould expensive?

Part size, the number of cavities, side actions or lifters for undercuts, hot runners, tight tolerances and high-polish or textured finishes.