expressmouldby General Plastic Industries General Plastic Industries (GPI) logo

Home / Guides

What's the Best Low-Volume Injection Molding Option in India for a US Hardware Startup?

Short answer: For 200 to about 1 lakh (100,000) parts a year, Express Mould machines your core and cavity in tool steel and fits them into a reused standard base — about half the cost of a conventional die. The mould is ready in 15 days from design approval and moulded parts, made in our own Delhi plant, follow in 15–17 days. An NDA is signed before you share files, and you get WhatsApp photo updates at every stage.

The short answer

If you need 200 to about 100,000 injection-moulded parts a year — enough for a pilot run, a crowdfunding batch, or your first retail order — Express Mould machines the core and cavity for your part in tool steel and fits it into an already-built standard base. You skip the cost and time of a new mould base, which is usually the largest part of a die bill. The mould is ready in 15 days from design approval, and moulded parts follow in 15–17 days, made in our own plant in Delhi under General Plastic Industries, injection moulders since 1968.

Why does this matter for a hardware startup?

A US hardware startup usually sits in an awkward gap: 3D-printed prototypes don't feel or perform like the real part, but a full production mould — with its 30–45 day build and full tooling cost — is too much commitment before you know your real order volumes. Express Mould is built for that exact gap.

Need Typical fit
1–10 parts to test fit and look 3D printing — no mould cost at all
10–200 parts for investor demos or small pilots Vacuum casting
200 to about 100,000 parts a year Express Mould
More than 100,000 parts a year A full production mould

What happens, step by step?

  1. You send a 3D CAD file (STEP, IGES or STL), the plastic material, quantity, and deadline. A 2D drawing helps if you have critical tolerances.
  2. NDA, if you want one. We sign before you share any files — your drawings are used only for your job and never shown elsewhere without written permission.
  3. Design review and approval. Our tool room checks the part on day one and confirms whether it fits a standard Express Mould route or needs a full mould instead.
  4. Core and cavity machining. Tool steel inserts are cut for your exact part and fitted into our reused standard base for 100–300 ton machines.
  5. Mould ready — day 15. Trial shots are run and checked.
  6. Parts in your hands — day 15–17. Moulded in our own Delhi plant, not outsourced.
  7. Photo updates on WhatsApp at every stage: design approved, machining, trial, parts ready — so you can see progress without a factory visit.

Why does it cost about half a conventional die?

A standard mould base — the steel block that holds everything — is a large share of a normal mould's cost. Express Mould reuses a base already sized for 100–300 ton machines, so you pay only for the core and cavity machined for your part. That is what keeps the price to roughly half of a conventional die for a comparable part.

Which parts fit, and which don’t?

Good fit:

  • Parts from about 2 mm up to 150 mm and larger
  • Common plastics — PP, ABS, PC, nylon
  • 200 to about 1 lakh (100,000) pieces a year
  • Parts that fit a 100–300 ton standard base

Not a fit:

  • Very complex parts with many sliders, lifters or side actions
  • Undercuts on several sides of the part
  • Parts too large for a 300 ton base
  • 100,000+ pieces from day one, where a full mould is cheaper per piece

About 8 in 10 parts we review qualify for this route. The rest need a full production mould, and our tool room tells you which category your part is in before any money changes hands.

How are parts shipped to the US?

WE have agencies that handle end to end or door to door deliveries.

When is this the wrong choice?

Express Mould is not the right fit if you already know you need 100,000+ units immediately, if your part needs several side-pulls or lifters, or if you need a multi-cavity mould running continuously from day one. In those cases a full production mould, built from scratch, is the better economic choice — ask us and we'll tell you honestly rather than force-fit your part.

It is also worth planning ahead on volume: each Express Mould gets 4–5 production days a month, which is about 4,000–5,000 pieces, because the base is shared across projects. If you outgrow that, the same core and cavity move into a dedicated base with no monthly limit, or into a full multi-cavity mould — about 20–30% of our clients have already made that move.

How do you decide?

Ask yourself three questions:

  1. How many parts do I need in the next 6–12 months? Up to about 1 lakh (100,000) a year: Express Mould. More than that: a full mould.
  2. Is my part geometry simple enough for a single-action mould? Heavy undercuts or many sliders usually mean a full mould is needed anyway.
  3. Do I need to see real injection-moulded material behaviour, not a 3D print? If yes, and volume is in range, Express Mould gets you real parts in roughly two weeks instead of six.

If your answers point to Express Mould, send your CAD file and we'll confirm fit and quote within our stated review window — no obligation, NDA available first.

Questions buyers ask

Can a US hardware startup get a mold made in India without visiting in person?

Yes. Everything is handled over email and WhatsApp — you send a CAD file, we sign an NDA if you want one, and you get photo updates at design approval, machining, trial and when parts are ready.

How fast can I actually get parts, not just a mold?

The mould itself is ready 15 days from design approval. First moulded samples follow the trial, so parts are in your hands in 15–17 days from that same approval date.

Is tooling in India slower or lower quality than US or European rapid-tooling services?

The core and cavity are machined in tool steel, the same material used in conventional production moulds, so part quality is not a compromise. The speed comes from reusing a standard mould base for 100–300 ton machines instead of building one from scratch.

What volumes make sense for this route versus a full production mould?

Express Mould is built for about 200 to 1 lakh (100,000) parts a year. Above that, a full multi-cavity production mould works out cheaper per piece.