expressmouldby General Plastic Industries General Plastic Industries (GPI) logo

Home / Guides

Steel Test Certificate for an Injection Mould: What It Is and Why to Ask for It

Short answer: A steel test certificate (also called a mill or material test certificate) is the steel supplier's document that states the grade, chemical composition and hardness of a specific steel block, traced by its heat number. Ask your die maker for it before the core and cavity are machined, check that the grade matches what you were quoted, and check that the heat number on the certificate matches the block used.

The direct answer

Ask for the steel test certificate of the core and cavity steel before your die maker starts machining. It is the simplest way to know that the steel you are paying for is the steel going into your mould.

This is the lesson from Mould Ka Sach, Episode 1: the die maker quoted ₹5 lakh, the buyer bargained it down to ₹3 lakh, and the saving came from the steel.

Why do cheap moulds usually save on steel?

The core and cavity are the parts of the mould that form your product. They take the clamping force, the injection pressure and the heat of every cycle. Tool steels made for this job, such as pre-hardened P20 grades or hardened H13 grades, are chosen because they hold their size, polish well and resist wear.

When a quote is far below the market, something has to give, and steel is one of the easiest places to cut cost without the buyer noticing on day one. The first samples may look fine. The problems show up later: wear on shut-off faces, flash, a finish that will not polish, rust in the cavity, or cracks, long before the mould has run the number of parts you planned.

What does a steel test certificate show?

A steel test certificate (often called a mill test certificate or material test certificate) typically states:

  • Steel grade: the specification the steel was made to.
  • Heat number: the batch number that links the paper to the physical block.
  • Chemical composition: carbon, chromium, molybdenum and other elements, measured for that heat.
  • Hardness: the delivered hardness, for example for pre-hardened steel.
  • Supplier and mill details: who made and who supplied the steel.

How do you check a steel test certificate?

  1. Grade: does the grade on the certificate match the grade in your quotation or mould design?
  2. Heat number: is the same heat number stamped or marked on the block? Ask for a photo.
  3. Hardness: for pre-hardened steel, ask for a hardness check on the actual block, not only the paper value.
  4. Records: keep the certificate, the photo and the supplier invoice with your mould file.

A good die maker will share these without any problem. If they hesitate, that tells you something too.

What should you ask before you order a mould?

  • Which steel grade will be used for the core, the cavity and the inserts?
  • Will you share the steel test certificate before machining starts?
  • Can you send a photo of the heat number on the block?
  • Who owns the mould and its records once it is paid for?

How does Express Mould handle steel?

Every Express Mould core and cavity is cut in tool steel and fitted into one of our ready-made standard mould bases. That is how we deliver a mould in 15 days from design approval at about half the usual cost: the saving comes from reusing the base, not from the steel in your part. Send your drawing for a review and we will tell you the steel, the price and the date.

Questions buyers ask

What is a steel test certificate?

It is the document the steel mill or supplier issues for a batch of steel. It shows the steel grade, its chemical composition, its hardness, and a heat (batch) number that links the paper to the actual block.

Why does the steel matter so much in a mould?

The core and cavity take the pressure, heat and wear of every shot. The right tool steel holds its size, polishes well and lasts for the life you paid for. A lower grade can wear, rust, crack or lose its finish much sooner, and you only find out after you have paid for the mould.

When should I ask for the certificate?

Before machining starts, ideally at the time of order. Asking after the mould is finished is too late to change the steel.

How do I know the certificate belongs to my mould?

Ask for the heat number on the certificate and a photo of the same number on the steel block, and keep a copy of the supplier's invoice for that block with your mould records.